Hello all,
I am replacing my 49 year old internal fibreglass fuel tank in my Broom Pisces - mainly because it leaks like a sieve!
A local precision engineering company will be making me a new tank from stainless steel, using the current tank as a template.
I am going to order a new fuel sender for the new tank (the magnetic float "pole" type), whilst still using the original fuel gauge.
I was poised to order a fuel sender when I noticed that they come in different resistances; 0-190 ohm for European fuel gauges and 230-30 ohm for USA fuel gauges.
Now, my fuel gauge is an original 1960's Mercruiser one - should I be going for the 230-30 ohm sender unit or the 0-190 ohm one?
Many thanks in anticipation of your help / advise.
Ian.
Fuel gauge resistance?!
-
- Posts: 156
- Joined: Tue Feb 17, 2009 8:20 pm
- CMBA Member: 768
- Location: Glasgow, Scotland
Re: Fuel gauge resistance?!
Not trying to appear obvious but can you measure the resistance of the old one?
-
- Posts: 156
- Joined: Tue Feb 17, 2009 8:20 pm
- CMBA Member: 768
- Location: Glasgow, Scotland
Re: Fuel gauge resistance?!
I measured the resistance.
However - the meter read circa 90 ohms when it was attached to two posts on the fuel gauge. But my choice for fuel sender is a 230 - 30 ohm sender or a 0 - 190 ohm sender.
Can anyone advise what a resistance of circa 90 ohms across the fuel gauge would indicate which sender I should get? I disconnected all wires from the gauge before testing the resistance.
Diomedea; the reason I hadn't measured it was the distance from my home to where the boat is wintered. I was hoping someone on the forum would've known.
Anyway - after a morning jaunt to the boat yard, I at least now know what resistance the meter across the gauge yielded!
However - the meter read circa 90 ohms when it was attached to two posts on the fuel gauge. But my choice for fuel sender is a 230 - 30 ohm sender or a 0 - 190 ohm sender.
Can anyone advise what a resistance of circa 90 ohms across the fuel gauge would indicate which sender I should get? I disconnected all wires from the gauge before testing the resistance.
Diomedea; the reason I hadn't measured it was the distance from my home to where the boat is wintered. I was hoping someone on the forum would've known.
Anyway - after a morning jaunt to the boat yard, I at least now know what resistance the meter across the gauge yielded!
-
- Posts: 610
- Joined: Wed Mar 31, 2010 12:13 am
- CMBA Member: 924
- Location: Donegal, Ireland
Re: Fuel gauge resistance?!
If your gauge is USA made,then you need a 0-190 sender.Also Sent PM.
no matter how bad it is,it can always get worse,I'm an optimist
-
- Posts: 156
- Joined: Tue Feb 17, 2009 8:20 pm
- CMBA Member: 768
- Location: Glasgow, Scotland
Re: Fuel gauge resistance?!
Got my new fuel sender; seems to work well!
-
- Posts: 156
- Joined: Tue Feb 17, 2009 8:20 pm
- CMBA Member: 768
- Location: Glasgow, Scotland
Re: Fuel gauge resistance?!
I decided to go for the 240 - 30 ohm sender as the fuel gauge is an original 1960s one. Looks like I guessed right as the video above shows. Usually, if I have a choice of two items; one right and one wrong, I always choose the wrong one. The picture below shoes the old sender and the replacement one.
-
- Posts: 156
- Joined: Tue Feb 17, 2009 8:20 pm
- CMBA Member: 768
- Location: Glasgow, Scotland
Re: Fuel gauge resistance?!
Here's the fuel tank - nearly 50 years old and leaks like a sieve. Once replaced, It'll be nice not having the sniff of 4 star mixing with the natural air of Loch Lomond.