Ray Wright Delta GRP

A dedicated area to showcase your ongoing and completed restorations.

Moderators: Alacrity, Rapier

Post Reply
Peterbonsall
Posts: 3
Joined: Thu Dec 14, 2017 10:39 am
CMBA Member: 0

Ray Wright Delta GRP

Post by Peterbonsall »

Hi all , I "acquired " a GRP Ray Wright Delta, James has now taken on the project and needs a marinised Ford V4 or a 1600 any suggestions, ? I have an old Ford 3 litre V6 without a carb in the shed if anybody fancies a project. What's the trick to adding photos ? I've cut n cropped but still " file to large" !

User avatar
Rapier
Site Admin
Posts: 13892
Joined: Thu Feb 05, 2009 5:16 pm
CMBA Member: 569
Location: West Glos

Re: Ray Wright Delta GRP

Post by Rapier »

Hi, hope this might help with the loading pics. Am sure there are other photo resizers out there but this works for me.

viewtopic.php?p=36422#p36422

Good luck with the project Delta; they go very well with the 1600.
Fasten bra straps and remove dentures...

tim briggs
Posts: 26
Joined: Fri Aug 14, 2020 5:17 pm
CMBA Member: 0

Re: Ray Wright Delta GRP

Post by tim briggs »

I have a Worthy Blake 1600 cross flow available. It is the ford unit, fully marinised (even has a sump oil cooler, marine exhaust manifold and jabsco pump).
I purchased it off ebay for a project. it has had some work done as all the blanking caps on the block and head are new. the seller promised to send me details of the work carried out, but 18 months later and lots of emails, i have given up.
It is currently mated to a HyDrive gear box and looks like it came from a river cruiser.
I have done nothing with it, but if you are interested i can do a compression test and try to get it running.
T
Attachments
worthy blake 2.jpg
worthy blake 2.jpg (30.02 KiB) Viewed 4224 times
worthy blake 1.jpg
worthy blake 1.jpg (27.22 KiB) Viewed 4224 times

Peterbonsall
Posts: 3
Joined: Thu Dec 14, 2017 10:39 am
CMBA Member: 0

Re: Ray Wright Delta GRP

Post by Peterbonsall »

Hi Tim
That sounds great, good ol eBay ! I've popped a pm over to you
Best regards Peter

Post Reply