Does anybody have any reference material (pictures, spec etc.) relating to my latest project a Shakespeare Starfire in need of some TLC and an engine?
Thanks in advance.
Shakespeare Starfire
- Rapier
- Site Admin
- Posts: 13951
- Joined: Thu Feb 05, 2009 5:16 pm
- CMBA Member: 569
- Location: West Glos
Re: Shakespeare Starfire
Here's a link to the site:-
http://people.dsv.su.se/~klas/Boats/Sta ... rfire.html
They were originally powered by the 120hp Mercruiser I believe.
http://people.dsv.su.se/~klas/Boats/Sta ... rfire.html
They were originally powered by the 120hp Mercruiser I believe.
Fasten bra straps and remove dentures...
-
- Posts: 17
- Joined: Fri Jun 24, 2011 10:25 pm
- CMBA Member: 0
Re: Shakespeare Starfire
Yes thanks, managed to find these pages through Google, difficult to find anything else.
- Rapier
- Site Admin
- Posts: 13951
- Joined: Thu Feb 05, 2009 5:16 pm
- CMBA Member: 569
- Location: West Glos
Re: Shakespeare Starfire
Yes, only ever seen yours and blue one that was a near bare shell. Can imagine they were very expensive when new and very few built, quite apart from the comments re. the heavy motor.
Fasten bra straps and remove dentures...
-
- Posts: 17
- Joined: Fri Jun 24, 2011 10:25 pm
- CMBA Member: 0
Re: Shakespeare Starfire
Well the strip down process and restoration is well on it's way but I wondered whether anybody can offer some advise in terms of deck preparation before painting.
When the boat arrived it seems that the last attempt at restoring the boat was done by applying a primer/undercoat coat on top of the original metallic red gel coat and then painting the final top coat. Two subsequent problems seem to have occurred, firstly the paint had lots of bubbles on the surface and in other areas the paint was simply lifting from the primer that was greasy underneath.
I've spent quite a lot of time removing the loose top coat paint and sanding back the bubbles which have now revealed pitting on the deck (as per first picture attached).
Can anybody offer any advise in terms of how to best get the deck surface back to a position where I can undercoat and top paint, i.e. if the rest of the paint surface is sound can I filler/primer the pitting or is it the worst case scenario and having to sand the complete deck back to the previous undercoat and then re: undercoat & top coat?
When the boat arrived it seems that the last attempt at restoring the boat was done by applying a primer/undercoat coat on top of the original metallic red gel coat and then painting the final top coat. Two subsequent problems seem to have occurred, firstly the paint had lots of bubbles on the surface and in other areas the paint was simply lifting from the primer that was greasy underneath.
I've spent quite a lot of time removing the loose top coat paint and sanding back the bubbles which have now revealed pitting on the deck (as per first picture attached).
Can anybody offer any advise in terms of how to best get the deck surface back to a position where I can undercoat and top paint, i.e. if the rest of the paint surface is sound can I filler/primer the pitting or is it the worst case scenario and having to sand the complete deck back to the previous undercoat and then re: undercoat & top coat?
-
- Posts: 610
- Joined: Wed Mar 31, 2010 12:13 am
- CMBA Member: 924
- Location: Donegal, Ireland
Re: Shakespeare Starfire
I haven't painted yet,but I sanded all the old paint off and filled wit a marine epoxy.
no matter how bad it is,it can always get worse,I'm an optimist
-
- Posts: 610
- Joined: Wed Mar 31, 2010 12:13 am
- CMBA Member: 924
- Location: Donegal, Ireland
Re: Shakespeare Starfire
For comparison before I decided to sand old paint off
no matter how bad it is,it can always get worse,I'm an optimist
-
- Posts: 17
- Joined: Fri Jun 24, 2011 10:25 pm
- CMBA Member: 0
Re: Shakespeare Starfire
Great to see another member restoring a Starfire "PopeyeShellard" and nice to get in touch Nick.
Thought it was about time (embarrassingly given the date of my last post) to share my collection of restoration photos for anybody else out there trying to restore one.
https://plus.google.com/photos/10816237 ... qLGzome_AE
Hope they help someone and please get in touch if you want to share any info.
Do hope I can get to see you all on the water at some time just need to get the engine in and commissioned, respray top and fit interior. Seems easy when you say it quickly, any volunteers in the Worcestershire area that can help (yours desperately!)?
Cheers
Simon
Thought it was about time (embarrassingly given the date of my last post) to share my collection of restoration photos for anybody else out there trying to restore one.
https://plus.google.com/photos/10816237 ... qLGzome_AE
Hope they help someone and please get in touch if you want to share any info.
Do hope I can get to see you all on the water at some time just need to get the engine in and commissioned, respray top and fit interior. Seems easy when you say it quickly, any volunteers in the Worcestershire area that can help (yours desperately!)?
Cheers
Simon