Both end caps are rusty, one brush requires re-soldering.
Hydraulic valve bodies untested.
Reservoir tanks OK, fill screws need replacing, threads OK.
Armatures 'look' OK - untested.
Power Trim Pump
Re: Power Trim Pump
On each pump there is one bolt from the reservoir tank to motor end cap that is rotten at the end of the thread.
Both end caps are rusty, one brush requires re-soldering.
Hydraulic valve bodies untested.
Reservoir tanks OK, fill screws need replacing, threads OK.
Armatures 'look' OK - untested.
Both end caps are rusty, one brush requires re-soldering.
Hydraulic valve bodies untested.
Reservoir tanks OK, fill screws need replacing, threads OK.
Armatures 'look' OK - untested.
-
broompisces
- Posts: 159
- Joined: Tue Feb 17, 2009 8:20 pm
- CMBA Member: 768
- Location: Glasgow, Scotland
Re: Power Trim Pump
Thanks for posting those images, Sweep.
I'll see what the one that's on its way to me is like - I bought it as "working".
I was tempted to get a company I've used before to service the motor - but maybe it's a case of "let sleeping dogs lie"?
I'll see what the one that's on its way to me is like - I bought it as "working".
I was tempted to get a company I've used before to service the motor - but maybe it's a case of "let sleeping dogs lie"?