i got new deck fitings on my speed boat now
and i cant up lode my new photos for some reson ?
whiy is the forum not leting me up lode photo of my speeed boat ?
my speed boat ues to have 4 step plates
i dont no what coler to get
white or black inserts
but i can see the ruber on the windo is white
i have not made my mind up
hi i am adam and im new to this forum and help
- watermint
- Posts: 31
- Joined: Wed Mar 16, 2011 1:26 am
- CMBA Member: 0
- Location: pembrokeshier
- Contact:
Re: hi i am adam and im new to this forum and help
Last edited by watermint on Mon Apr 04, 2011 1:32 am, edited 2 times in total.
Re: hi i am adam and im new to this forum and help
Hi Adam
I bought a retro look speedo from Faria - see link - as I couldn't find where to get my original one repaired.
http://www.faria-instruments.com/
That being said I am still trying to get the new one to work properly - need to check the speed with GPS at some stage.
Hope to catch up with you at the Griffin at sometime. Actually doing a Classic Car tour down that way in May but no time for boats I am afraid apart from a trip around Ramsey Island maybe.
SimonP
I bought a retro look speedo from Faria - see link - as I couldn't find where to get my original one repaired.
http://www.faria-instruments.com/
That being said I am still trying to get the new one to work properly - need to check the speed with GPS at some stage.
Hope to catch up with you at the Griffin at sometime. Actually doing a Classic Car tour down that way in May but no time for boats I am afraid apart from a trip around Ramsey Island maybe.
SimonP
Simmonds fitted from new with what, I believe, is the only running factory marinised Daimler 2.5 litre V8 (as fitted to the Daimler SP 250) in the UK. Please let me know if you find another! Believed to be Norman Buckley's race boat.
- watermint
- Posts: 31
- Joined: Wed Mar 16, 2011 1:26 am
- CMBA Member: 0
- Location: pembrokeshier
- Contact:
Re: hi i am adam and im new to this forum and help
the new deck fitings
the new deck fitings
my speed boat ues to have 4 step plates
i dont no what coler to get
white or black inserts
but i can see the ruber on the windo is white
i have not made my mind up
- watermint
- Posts: 31
- Joined: Wed Mar 16, 2011 1:26 am
- CMBA Member: 0
- Location: pembrokeshier
- Contact:
Re: hi i am adam and im new to this forum and help
what do u think of the speed boat !
- Rapier
- Site Admin
- Posts: 14025
- Joined: Thu Feb 05, 2009 5:16 pm
- CMBA Member: 569
- Location: West Glos
Re: hi i am adam and im new to this forum and help
Looking good - the fitting are from Timage?
Fasten bra straps and remove dentures...
Re: hi i am adam and im new to this forum and help
I would say white inserts. I have these and I think they will look good.
SimonP
SimonP
Simmonds fitted from new with what, I believe, is the only running factory marinised Daimler 2.5 litre V8 (as fitted to the Daimler SP 250) in the UK. Please let me know if you find another! Believed to be Norman Buckley's race boat.
- watermint
- Posts: 31
- Joined: Wed Mar 16, 2011 1:26 am
- CMBA Member: 0
- Location: pembrokeshier
- Contact:
Re: hi i am adam and im new to this forum and help
the fitting are from Timage
and i will go for white inserts
Timage has got all the bits i need
but i want to find some stanless,steel flush monted navgashon lites to fin in the side of the bow of the speed boat
and i think this will look good
and i will go for white inserts
Timage has got all the bits i need
but i want to find some stanless,steel flush monted navgashon lites to fin in the side of the bow of the speed boat
and i think this will look good
- Rapier
- Site Admin
- Posts: 14025
- Joined: Thu Feb 05, 2009 5:16 pm
- CMBA Member: 569
- Location: West Glos
Re: hi i am adam and im new to this forum and help
Personally I wouldn't bother with the cost and hassle if you aren't using it at night. If you are, I'd recommend a bow light and clear stern light on a pole or a transom light, rather than cut holes in the hull.
Fasten bra straps and remove dentures...
- watermint
- Posts: 31
- Joined: Wed Mar 16, 2011 1:26 am
- CMBA Member: 0
- Location: pembrokeshier
- Contact:
Re: hi i am adam and im new to this forum and help
i put a order to day at 9.00 from Timage and i hope to get the bits by friday moring
im having 2 new, step plates and 2 new, stern handels
my speed boat will have 4 step plates
and a other bits from step Timage but i
can only put a order in of so much biits at a time
but soon i hope i can finsh the boat off
my speed boat did have step plates at one time and u can see the hols wher thay uest to be
hope to get some work done to speed boat this friday
im having 2 new, step plates and 2 new, stern handels
my speed boat will have 4 step plates
and a other bits from step Timage but i
can only put a order in of so much biits at a time
but soon i hope i can finsh the boat off
my speed boat did have step plates at one time and u can see the hols wher thay uest to be
hope to get some work done to speed boat this friday
- watermint
- Posts: 31
- Joined: Wed Mar 16, 2011 1:26 am
- CMBA Member: 0
- Location: pembrokeshier
- Contact:
Re: hi i am adam and im new to this forum and help
dos aney one no wher i can get rubing strip from to put on the keel of the speed boat !